The advantage of applying ultrasonic point melting machine to automobile trim

Two kinds of welding processes are usually used for automobile interior trim parts, one is hot melt riveting (including hot plate process), and the other is ultrasonic welding. The following is a brief introduction of the advantages of ultrasonic spot melting machine welding car interior.



1. There is no indentation and damage on the surface of the product after welding, and the surface of the workpiece after welding is beautiful.

2. After the welding is completed, the welding parts and body are assembled in good condition.

3. Excellent design of the bottom die ensures the precise positioning of each part of the door plate and the integrity of the contact surface.

4, the solder joint is beautiful and full, the hot melt plastic completely covers the welding hole, the top is smooth and the positioning is accurate. After welding, the appearance of all solder joints is unified, and the welding head has no wire drawing phenomenon.

5, the solder joint has the physical properties and mechanical strength of the same material.

6, to ensure that the welding strength of the welding point, the parts and the body have a good connection, after loading operation vibration will not fall off.

7, the whole welding process low energy consumption, do not need to add any flux, low cost and high efficiency.