Installation of ultrasonic plastic welder

Last period for you to introduce the daily maintenance of ultrasonic plastic welding machine, then today let Xiaobian briefly introduce the installation procedure of ultrasonic plastic welding machine.

1, ultrasonic plastic welding machine is still some high requirements for the place to be placed, it not only needs a firm, horizontal table. A space of more than 150mm should be left behind the machine for better ventilation and heat dissipation.

2. For better and safer operation, the grounding resistance is required to be less than 4 ohm.

3. Insert the two ends of the control wire into the three-leg socket at the back of the welding machine, and tighten the nut.

4, in order to make the machine work in a timely and effective way, the selection switch needs to be placed in the manual position.

5. Lock the four lifting screws to fix the ultrasonic vibrating head. Do not overexert, so as not to slip the teeth

6. Clean the contact surface between the upper welding die and the ultrasonic vibrating head, engage it with screws, and lock it with a random special wrench. The locking force distance is 25 Newtons/m.

7. Connect the air pipe of the external air source to the air filter of the welding machine.

8, in order to better use effect of the welding machine, to maintain the performance of the welding machine and safe production, each time the machine or replace the welding mold, adjust the vibration system of the welding machine and vibration system vibration degree is not less, so the sound detection procedure is very important.